Bindings

Samsung Camera 2.0.709.0 (SHC 2.0)

  • Additional mechanism for deleting the images that exceed the count and size limit

SAMSUNG CAMERA 2.0.410.0 (Classic)

  • Additional mechanism for deleting the images that exceed the count and size limit

SAMSUNG CAMERA 2.0.408.0 (Classic)

  • No images are additionally stored locally on the SHC if local SmartHome is not activated
  • The storage full message is only generated once (previously daily) when the local storage threshold is reached

SAMSUNG CAMERA 2.0.707.0 (SHC 2.0)

  • Improved stability of the local communication Samsung Camera add-in version

CoSIP 1.0.159.0

  • Fix for the innogy/RWE devices inclusion flow
  • Improvements regarding the reachability and the responsiveness of the innogy/RWE climate devices

    There might be some lag since the interaction was triggered until the target temperature is displayed on the device/in the App, but the reachability and the responsiveness of the innogy/RWE climate devices should be visibly improved.

SMA 2.0.533.0

  • Added a new SMA inverter model to the supported devices list

Philips Hue 2.0.161.0 (Classic)

  • Update Rebex libraries to latest version

SMA 2.0.118.0 (Classic)

  • Added a new SMA inverter model to the supported devices list
  • Update Rebex libraries to latest version

Netatmo 2.0.133.0 (Classic)

  • Update Rebex libraries to latest version

Power Control 2.0.62.0 (Classic)

  • Update Rebex libraries to latest version

Power Control Solar 2.10.68.0 (Classic)

  • Update Rebex libraries to latest version

Storage Control 2.0.65.0 (Classic)

  • Update Rebex libraries to latest version

Energy Control 2.0.67.0 (Classic)

  • Update Rebex libraries to latest version

Samsung Camera 2.0.85.0 (Classic)

  • Update Rebex libraries to latest version

PHILIPS HUE 2.0.561.0

  • Multiple fixes for Philips Hue
    • Fix to update the maximum number of Philips Hue devices that could be discovered at a time
    • Fix for the manual inclusion flow of the Philips Hue Bridge when the allocated IP of the bridge has been changed

Philips Hue 2.0.159.0 (Classic)

  • Fix for GetActive bridge response

ENTR YALE 2.0.511.0

  • Fix for obfuscation of the ENTR Yale PIN in the controller logs

COSIP 1.0.156.0

  • Workaround for roller shutter devices from the previous release (non-effect-switching in 12 hours interval) was rolled back due to side-effects
  • Fix for various interaction and device control issues problems caused by the previous version

Samsung Camera 2.0.569.0

  • Fix for Samsung Camera regarding the mechanism handling the images capture and upload

ENTR Yale 2.0.509.0

  • Bugfixes
    • Fixed the removal of the security PIN
    • Fix for alert handling specific to ENTR Yale add-in
    • Fix timeout reading buffer error
  • Fix support for ENTR Yale for 2nd gen SHC (OS Version min. 8.17)

Samsung Camera 2.0.84.0 (Classic)

  • Added support for the generation of Image Encrypted message when the Image Encrypting option is activated on SmartCam account

Storage Control 2.0.64.0 (Classic)

  • Fix for Connection Interrupted banner after device inclusion

ENTR Yale 2.0.73.0 (Classic)

  • Bugfixes
    • Fixed the generation of device activity
    • Fixed the removal of the security PIN
    • Fixed timeout reading buffer error

Philips Hue 2.0.555.0

  • Various fixes for better handling of the Philips Hue bridge reachability when the IP of the bridge is changed
  • Added support for Philips Hue zones and rooms

COSIP 1.0.155.0

  • Fix for the uncommanded actions of the ISR2 devices when the device was changing the shutter level without any intervention from the user's side

EasyHomeControl 2.0.82.0 (Classic)

  • Improved notification texts

Philips Hue 2.0.147.0 (Classic)

  • Support for Philips Hue groups

AL-KO 2.0.103.0 (CLASSIC)

  • Fix for the deactivation of the mowing program when 'margin mowing' option is active for a mowing timespan.

Buderus 2.0.546.0

  • Improvements regarding Buderus inclusion security

NETATMO 2.0.537.0

  • Improvement regarding Netatmo communication security (​Netatmo username and password needed to be filled in again)

Philips Hue 2.0.547.0

  • Logging improvement for Philips Hue binding for easier debugging

Netatmo 2.0.536.0

  • Improvement on Netatmo binding stability after update

Samsung 2.0.567.0

  • Improvement of the image upload for Samsung Camera
  • Various Samsung Camera stability and logging fixes

CoSIP 1.0.152.0

  • Improvements for the reachability of the Cosip climate and motion detector devices
  • Fixes for some Cosip direct linking specific interactions
  • General improvements on the Cosip devices discovery and inclusion flow
  • Improvement of the smoke detectors stability (users might need to factory reset/reinclude the problematic devices)
  • Fix for the Cosip devices toggle function for scenarios with multiple triggers and actions
  • Various fixes for the banners underneath the factory reset CoSIP devices

SMA 2.0.532.0

  • Added storage
    • 9331 - "Sunny Island 3.0M-12"
    • 9474 - "Sunny Island 4.4M-13"
    • 9475 - "Sunny Island 6.0H-13"
    • 9476 - "Sunny Island 8.0H-13"
    • 9486 - "Sunny Island 5.0H-13"
  • Added inverters
    • 9347 - "STP 8.0-3AV-40"
    • 9348 - "STP 10.0-3AV-40"

Netatmo 2.0.534.0

  • Fixed issue where Netatmo devices could sometimes be duplicated during device discovery and could also be included as duplicates.

Samsung 2.0.556.0

  • Fixed issues where some alerts would not be discarded and incorrectly generated