Remote control

Home control at the touch of a button: With the remote control, you can easily control your SmartHome devices in your house and apartment from a distance of up to 100 meters. The mini assistant with the latest radio technology makes your everyday life comfortable and practical. It has eight buttons - you decide what each button controls. One move and you can switch your desk lamp, coffee machine or shutters, heater and radio on and off from the couch.

  • Keys can be assigned individually and multiple times
  • Easy operation
  • For all SmartHome devices
  • Easy to install, set up and control
  • Also works fully locally: The local SmartHome

Prerequisites

  • SmartHome central

Box contents

  • Remote control
  • Batteries 1.5 V LR03 / Micro / AAA (2x)
  • User instructions

Technical data

Device name BRC8
Power supply 2xLR03 (Micro)
Battery life approx. 1 year
Max. Transmission power 10mW
Radio frequency 868.3MHz
Open field range approx. 100m
Recipient class SRD Class2
Ambient temperature +5°C to +35°C
Dimensions 40.5x135x15mm (WxHxD)
Weight 53g

Installation and inclusion

Before installation, please note the serial number in the battery compartment (12 digits below the barcode) and the exact installation location. You will need this for later integration into your SmartHome.


After inserting the batteries for the first time, the remote control tries to automatically integrate into the SmartHome system for three minutes (LED flashes briefly every ten seconds). To do this, the SHC must be in search mode. Successful integration is signaled by the LED lighting up for a long time. In addition, you can try to integrate again at any time by pressing a button on the remote control. The LED flashes briefly.


The functionality of the eight buttons or the four separate pairs of buttons are defined in the SmartHome software. By pressing a button, the specified command is transmitted to the device to be controlled.


Successful transmission of the command is confirmed by the LED flashing once. If it flashes briefly three times, there is an error. Possible causes for this could be:

  • Recipient not reachable
  • Receiver cannot execute command (load failure, mechanical blockage, etc.)
  • Receiver defective or configuration lost

Reset

Factory Reset Devices

Downloads

User instructions